Thank you for your visit to the anytron booth of Bitek Technology Inc., the No.1 digital label manufacturer in Korea, during the COPHEX 2019.
(The 14th Cosmetic∙Pharmaceutical∙Bio Process & Technology Exhibition)
It was such a big pleasure to have your interest towards our products, digital label printers.
We had a great success through the show. Especially, the new released digital in-line and digital die-cutting system received great attention from many customers.
The digital color label printer any-002 which passed the BS5609 test is optimized for GHS label. Already a significant number of domestic chemical companies are printing GHS labels via any-002. With the BS5609 certified printing engine,
‘any-JET’ on-demand label factory, powered by Memjet® technology, allows users to print what they need, when they need it, all while eliminating the delays and waste associated with outsourcing. End users like, brand owners and private label manufacturers, have the capabilities to build a more affordable, flexible and responsive label production environment.
Let’s compare the digital die-cutting method with the existing analog method.
First, there is a difference in preparing cutting line.
Since the steel die is made through bending as in a typical manufacturing way of analog method, which normally takes 3~5 hours, it is difficult to manufacture at the first place. However, the digital method uses a design program, and takes only 1 minute to prepare.
The analog method takes an hour to set-up, but with the digital method, the file can be simply saved and loaded again. If the cutting line has to be modified, it can be done immediately with the digital method. On the other hand, re-manufacture required for each error or requests for design changes are difficult to accommodate in the analog method.
Now the cutting has been completed. While the digital method simply saves the file for the completed cutting line, the analog method requires some separate storage area.
In general, the digital die-cutter, any-CUT III, can result in tenfold savings in terms of time and cost over the analog method. “Now, the digital laser die-cutter any-CUT III
can provide convenience and speed to all your label post-processing.