any-002 full color label printer, packaging, labels, and GHS labels on demand. With its 8inch OKI laser engine, the any-002 meets BS5609 certification standards for printing GHS labels that resist abrasion, long-term immersion in seawater, and UV exposure. Using compatible GHS label stock, labels printed on the any-002 can withstand the harshest of environmental conditions including long-term immersion in sea water.
The OKI Color label printer any-002 can make 5,000 color labels within 2 hours
As the output of a maximum 9m per minute is possible, 5,000 labels can be printed out within two hours. In addition, up to 200m can be printed out at one time and the setup for printing is unnecessary, therefore, immediate printing is possible.
No need for professional technicians
The operation of the equipment is easy and simple. Therefore, no professional technicians are necessary for printing, which reduces labor costs. With a one-day education, anyone can easily become a label printing specialist.
Label printing, handily done in an office
any-002 does not require a large space. It can be installed in small spaces such as offices and can print out labels immediately whenever necessary.
Let’s compare the digital die-cutting method with the existing analog method.
First, there is a difference in preparing cutting line.
Since the steel die is made through bending as in a typical manufacturing way of analog method, which normally takes 3~5 hours, it is difficult to manufacture at the first place. However, the digital method uses a design program, and takes only 1 minute to prepare.
The analog method takes an hour to set-up, but with the digital method, the file can be simply saved and loaded again. If the cutting line has to be modified, it can be done immediately with the digital method. On the other hand, re-manufacture required for each error or requests for design changes are difficult to accommodate in the analog method.
Now the cutting has been completed. While the digital method simply saves the file for the completed cutting line, the analog method requires some separate storage area.
In general, the digital die-cutter, any-CUT III, can result in tenfold savings in terms of time and cost over the analog method. “Now, the digital laser die-cutter any-CUT III
can provide convenience and speed to all your label post-processing.