Laser cutting process is simply using laser energy to change the shape or appearance of a material. It results in complete removal and separation of material from the top surface to the bottom surface along a selected pathway. Either a single layer material or multi-layer material can be used for laser cutting process When cutting multi-layer material, the laser beam can be precisely controlled by software to cut through the top layer without contacting the other layers.
This laser die-cutter cutting cut through is any-cut III of anytron laser die-cutter series, and it is doing half-cut and full-cut at the same time in this video. if necessary, it can do ‘full-cut’ all areas to cut. you can just set the laser power depending on label type or design as you wish.
Have you seen this kind of label?
It is called as Door Hanger and it is often seen in hotels and other places of lodging as a means for guests to communicate with maintenance and housekeeping staff.
A door hanger (also spelled doorhanger or door-hanger) is a plastic or cardboard sign, generally rectangular in shape, cut to hang from the handle or knob of a door.
Then, can we make door hanger (or door-hanger) with anytron like any-002 or any-cut? our answer is “YES” ! even with good quality and fast speed. if you have ever read my post about anytron series or are interested in digital label machine, you will understand why I can say ‘Yes!’ confidently.
It is doing half-cut and full-cut at the same time in this video. if necessary, it can do ‘full-cut’ all areas to cut. you can just set the laser power depending on label type or design as you wish.
DIGITAL | ANALOG | ||
---|---|---|---|
LASER | KNIFE | ||
No need | Mold Design | Every time for new design | |
No need | Every 1 month | Consumables | Almost everyday |
Immediately | 1 day | Lead-time | 2~3 days |
Much Acceptable | Short-run job | Less acceptable | |
Easy | Acceptable | Complicated Design | Difficult |
Small footprint | Working space | Factory | |
Anyone | Operator Level | Highly professional | |
10 min | Setup time | More than 1hour |
Let’s compare the digital die-cutting method with the existing analog method.
First, there is a difference in preparing cutting line.
Since the steel die is made through bending as in a typical manufacturing way of analog method, which normally takes 3~5 hours, it is difficult to manufacture at the first place. However, the digital method uses a design program, and takes only 1 minute to prepare.
The analog method takes an hour to set-up, but with the digital method, the file can be simply saved and loaded again. If the cutting line has to be modified, it can be done immediately with the digital method. On the other hand, re-manufacture required for each error or requests for design changes are difficult to accommodate in the analog method.
Now the cutting has been completed. While the digital method simply saves the file for the completed cutting line, the analog method requires some separate storage area.
In general, the digital die-cutter, any-CUT III, can result in tenfold savings in terms of time and cost over the analog method. “Now, the digital laser die-cutter any-CUT III
can provide convenience and speed to all your label post-processing.
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21500″ title=”Live demo”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21425″ title=”catalogue_any-CUT II”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21426″ title=”catalogue_any-CUT II”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21425″ title=”catalogue_any-CUT II”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21404″ title=”catalogue_any-PACK-system”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21141″ title=”catalogue_any-CUT II”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”21124″ title=”catalogue_anytron_Flow”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”20492″ title=”catalogue_anytron_RIP”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19546″ title=”catalogue_anycut1″][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19550″ title=”catalogue_anycut3″][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19555″ title=”catalogue_anyblade”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19559″ title=”catalogue_anypack”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19563″ title=”catalogue_anyslitter”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19570″ title=”request popup”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”20063″ title=”catalogue_anyjet”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”20476″ title=”Distributor pages”][/vc_column_text][/vc_column][/vc_row]
[vc_row][vc_column width=”1/1″][vc_column_text][contact-form-7 id=”19530″ title=”catalogue_any002″][/vc_column_text][/vc_column][/vc_row]